Fits IC-F12/IC-F22, IC-F3G/IC-F4G and IC-F31/IC-F41 series handportables.

Specification
ICOM – High Endurance, typically a shift and a half (5:5:90).
Pattern battery slightly less endurance compared to genuine battery.

Genuine ICOM BP279 High Capacity Battery Pack

Fits IC-F1000/IC-F2000 series and IC-F1000D/IC-F2000D handportables.

Specification
High Endurance – typically a shift and a half (5:5:90).
Meets IPX7 standard. Waterproof Battery. (Submerged 30 minutes at 1 metre depth).
High Capacity 1570mAh Li-Ion cells.

Genuine ICOM High Capacity Battery Pack

Fits IC-F3002/IC-F4002 handportables.

Specification
High Endurance – typically a shift and a half (5:5:90).
High Capacity 1900mAh Li-Ion cells.

Fits IC-F51/IC-F61 ATEX handportable radios. This is an ATEX approved accessory.

Specification
Big, durable PTT switch.
Large cord bush.
Large, strong clip with metal clip base.
Screw type plug firmly secures microphone to the radio and reduces stress on connector.

This ATEX approved IC-F51/F61 transceiver offers safety approved 2-way communication preventing explosion and fire hazard in specified hazardous areas.

Approved classes

The approved rating is II2G EEx ib IIA T3.

Special conditions for use:

• Must be used with BP-227AX

Approved accessories:

• Speaker-microphone HM-138

Please ensure the IC-F51/F61 ATEX rating is acceptable for the intended place of use.

These ATEX models have all the same functions and features as non-ATEX versions including;

Waterproof construction
The IC-F51 series has waterproof construction which is equivalent to IPX7. The IC-F51 series can withstand submersion in 1m depth of water for up to 30 minutes.

Tough and compact body
The aluminium die-cast chassis combined with a polycarbonate casing is designed to last. Its compact dimensions of 56 (W) x 97 (H) x 36 (D) mm allow the IC-F51 series to fit comfortably in your palm or shirt pocket.

Standard Lithium-Ion battery pack
The IC-F51 series comes with a standard 1700mAh Lithium-Ion battery pack, BP-227AX that provides stable output power and a practical 13 hours* of operating time. Lithium-ion batteries allow flexible charging** and have almost no memory effect.

*Typical operation; Tx:Rx:Stand-by duty cycle=5:5:90
** Please note that ATEX radios should not be charged in Hazardous environments.

Alphanumeric LCD
The IC-F51 features an 8-character 14 segment alphanumeric LCD. An automatic LCD backlight is standard, ideal for night time operation.

Built-in signalling
The IC-F51 series has 2-Tone, 5-Tone, CTCSS and DTCS signalling capabilities for group communication or selective calling as standard.

Built-in rolling type voice scrambler*
The IC-F51 series has a built-in voice scrambler. The scrambling system is fully compatible with the UT-110 voice scrambler unit, which uses 1020 codes (255 codes x 4 groups.). In addition, an inversion type voice scrambler is available in all versions
* ATEX version has a built-in UT-110 compatible voice scrambler.

Programmable functions
Up to 7 programmable buttons, [P0]–[P3], [▲], [▼],and [Red button] can be assigned additional functions to meet a variety of requirements. In addition, there is a space for function assign stickers below these buttons.

Optional speaker microphone, HM-138
The optional speaker microphone, HM-138, also has waterproof construction equivalent to IPX7. The HM-138 is approved for use with ATEX models.

IC-F51/F61 (ATEX version) Additional Features

• 12.5kHz channel step (VHF only)Wide/middle/narrow channel spacing
• Built-in compander (same as IC-F31G series and IC-F510 series)BIIS 1200 built-in
• SMA type ANT connector
• Up to 128 memory channels/8 memory banks
• MIL spec tested to MIL-STD F.

Fits F15/F25,  F34G/F44G, F3022/F4022, F3032S/F4032S and F3162/F4162 Series handportables.

Specification
Waterproof to IP67 standard.
High Endurance – typically a shift and a half (5:5:90).
High Capacity 2250mAh Li-Ion cells.

Designed to enhance coverage of a two-way radio system, the cost effective SRP repeater series uses a combination of our Icom IC-F5012/F6012 entry level mobile radios and can be used as a VHF to VHF (SRP-V11), UHF to UHF (SRP-U11), or cross band repeater (SRP-X11).

The SRP repeater instantly retransmits received audio without any noticeable delay. All repeaters in this series provide a stable 25 watt output power allowing a radio scheme to be boosted beyond the range of normal Private Mobile Radio (PMR) networks.

The SRP Repeater Series comes complete with housing (including 240V PSU) to mount the repeater. The SRP is incredibly flexible so that you can install the repeater in a vehicle, an office, or a temporary location.

What’s in the box?

• IC-F5012 or F6012 Body only x 2
• Steel housing in black
• Repeater interface
• AC power lead – fused
• 240Vac Power Supply
• 2 antenna working (Battery Backup & Single Antenna versions available – Call Sales on 01772 628222)

…….and of course, supplied fully programmed and configured to your licence.

The IC-FR5100/IC-FR6100 VHF/UHF commercial digital/analogue repeater series is the first Icom IDAS 6.25kHz digital capable repeater. It increases existing 12.5kHz channel capacity and offers easy way for organisations to migrate from analogue to digital in a cost effective, efficient way.

Two versions available
Two repeaters make up this new series of Digital/analogue repeaters. The series is divided into the IC-FR5100 for VHF and the IC-F6100 for UHF

What’s in the box?

• IC-FR5100 or FR6100 Repeater Module
• 19″ 2U Rack assembly in black
• Steel mounting brackets for module
• DC power lead – fused
• Rack Front Handles
• 12V DC operation and 2 antenna working (110V/230V mains & Single Antenna versions available – Call Sales on 01772 628222)

…….and of course, supplied fully programmed and configured to your licence.

Digital/analogue mixed mode operation
The IDAS radio (including repeater) can receive both analogue mode and digital mode signals on a single channel. You can partially introduce the IDAS digital radios, while using the existing analogue radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace, while running your existing analogue system, a cost efficient way to obtain the next generation in two way radio technology.

Double your channel capacity
The IDAS system utilises 6.25kHz narrow channel spacing, which when in a 12.5kHz channel, doubles the channel efficiency and capacity. One channel can be used for voice and one for data communication configuration.

Digital voice for clear audio
The IDAS radio uses the AMBE+2 codec providing crisp and clear communication and simultaneous data communication.

Selective call, group call and talk group ID
The IDAS system allows you to call individual or group users. The talk group ID shows group ID, unit ID or alias name on the display while receiving* a message. * This function is similar to the analogue mode PTT ID function, however, the IDAS radio can keep sending ID information during a voice transmission, so the receiving IDAS radio can decode the ID even when breaking into a conversation. (Late entry is possible)

Data communication
The IDAS system allows you 4800 bps* data communication. You can send a data message or GPS position data without an external data modem. *Error correction, control data, etc, will reduce number of bits available for actual data communication.

Digital voice encryption
The IDAS system provides secure communication using 15-bit key (about 32,000 keys) encryption.

RAN (Radio Access Number) for digital code squelch
The RAN code provides a digital code for accessing the IDAS repeater or digital code squelch function.

REPEATER FEATURES

25W, high duty cycle operation
Employing an effective cooling fan and high performance power amplifier, the IC-FR5100/FR6100 provides a stable 50W at 50% duty operation. The IC-FR5100/FR6100 provides 25W output at 100% duty operation.

19-inch rack mount, 2U height low profile design
The IC-FR5100 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack. A 2U height configuration allows you to stack multiple units in a rack.

Two RF modules in one unit
The IC-FR5100 series has an internal space for installing another RF unit, the optional UR-FR5000 series. Two RF modules can be installed in the chassis reducing installation space, while the RF modules can be programmed and operated independently.

Multiple-table
The IC-FR5100 series detects multiple CTCSS, DTCS tone and digital RAN (Radio Access Number) code on a channel (up to 16 tones/codes on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups.

5-Tone encoder/decoder
When a pre-programmed 5-tone signal is received, the IC-FR5100 series starts and/or finishes repeater operation (downlinking).

D-SUB 25-pin accessory connector
The IC-FR5100 series has a D-SUB 25-pin accessory connector for connecting external devices. An operating channel can be controlled by the input signal from the D-SUB 25-pin connector. * Analogue mode only.

Dot matrix, multi-function LCD
A dot matrix LCD is employed for the function display. Up to 12 characters can be displayed. There are 5 programmable buttons on the front panel allowing you to use the repeater as a base station.

32 memory channels
The IC-FR5100 series has 32 memory channels. Each memory channel stores a 12-character channel name, digital/analogue channel spacing, repeater/base operation etc, as well as frequency setting.

Voice scrambler
The IC-FR5100 series has a built-in inversion type* voice scrambler. The optional UT-109R/UT-110R* is available, when a more secure voice scrambler system is required. * The inversion type voice scrambler and UT-109R/UT-110R voice scrambler is for analogue mode only.

CW ID transmission function*
Own CW ID code or callsign can be sent at pre-programmed intervals. The ID code can be used for identifying the repeater. * Analogue mode transmission only. • Audio compander reduces background noise • Wide frequency coverage (136–174MHz, 400–470MHz and 450–520MHz) • High frequency stability (±0.5ppm) • PTT priority setting (Local mic, External PTT or Repeater operation) • Low voltage alert

IC-FR5100/FR6100 Additional Features

• Status call/request
• Radio check
• Call alert
• Remote radio stun/kill/revive
• Emergency call
• Call log
• Remote radio monitor … Remotely turns on the PTT and transmits anything the microphone hears for a pre-programmed time period.
• Data call … send and receive a data communication
• Simultaneous data call … Send and receive a data such as GPS position information with a voice transmission
• Audio compander reduces background noise
• Wide frequency coverage (136–174MHz, 400–470MHz and 450–520MHz)
• High frequency stability (±0.5ppm) PTT priority setting (Local mic, External PTT or Repeater operation)
• Low voltage alert

The new IC F5012 & IC F6012 mobile transceiver series is the successor to Icom’s best selling IC-F110S series and is designed as a simplified counterpart to Icom’s IC-F5062 series. This series has many attractive features and an uncomplicated LED display that makes it ideally suited to small to mid sized radio systems such as taxi operators, construction companies, security firms and farmers.

What’s in the box?

• IC-F5012 or F6012 transceiver body
• IC-HM152 rugged, fist microphone with mounting clip
• Black coated steel mounting bracket
• DC power lead – fused
• Screw and fixing kit

…….and of course, supplied fully programmed and configured to your licence.

Multi 5-tone function built-in
The IC-F5012 series has built-in 5-Tone, CTCSS and DTCS signalling capabilities for group communication. The IC-F5012 series can decode up eight 5-tone codes on a channel. The following actions are programmable to respond to each tone.

• Beep sound
• LED lighting
• Answer back call
• Auto TX
• Stun, kill revive
• Scanning
4W (typical) front mounted loud speaker
The IC-F5012 series has a 4W (typical) front mounted speaker providing the operator with clear audio during operation.

Easy to use
The IC-F5012 series has 4 programmable buttons. 8 memory channels can be easily selected with the programmable buttons. Backlit buttons make night time operation simple.

Enhanced Scan features
• Priority scan allows you to monitor one or two priority channels while scanning other non-priority channels.
• The Tx channel and talk back functions allow you to make a quick response while scanning.
• Nuisance delete … User can temporary skip a busy channel from the scanning list.
• Monitor key action … User can stop a scan when pushing the monitor button.

The IC-F1000D & F2000D series is a new range of compact, waterproof digital two way radios. Available in both VHF and UHF, the radios provide intelligent emergency functions and loud audio in a slim, waterproof chassis. The IC-F1000D series features make it ideal for a diverse range of business users including those in the manufacturing, facilities, security, retail and the hospitality markets.

IP67 Waterproof and Dust-tight Protection
The IC-F1000D & F2000D has a compact 52.2×111.8×30.3mm body and weighs only 260g (with BP-280 battery pack and belt clip). The IC-F1000D & F2000D has an extremely rugged construction providing superior protection against water (1m depth for 30 minutes), dust, sand, mud and other objects. The radio is also tested to MIL-STD 810 specifications and is designed to withstand harsh use.

IDAS 6.25kHz Digital Operation
The IC-F1000D & F2000D operates in conventional digital, Type-D single site trunking as well as analogue mode and provides an uncomplicated mixed mode migration path for business. The NXDN protocol offers 6.25kHz spectrum efficiency, higher security and better audio clarity – even on the fringes of the communication range.

The following IDAS features are programmable:

• PTT ID (TX)
• Individual/group calls
• Radio check (RX)
• Stun/Kill/Revive (RX)
• Remote monitor (RX)
• Emergency (TX)
• Call alert (RX)
• Digital voice scrambler (15-bit)
• Status Call (Power ON/OFF status and GPS request)
• Voting scan for multi-site conventional operation
• TX: Transmit, RX: Receive

Built in motion detection, man down and lone worker functions
To assist worker safety, the IC-F1000D/F2000D has three emergency related functions: motion detection, man down and lone worker functions. If one of these functions is activated, the transceiver automatically enters an emergency phase and starts counting down to send an emergency signal. The built-in motion sensor detects position, state of motion and non-motion.

Long Lasting Battery Pack
The large capacity waterproof battery pack, BP-280 (2400mAh typ.), provides 18 hours of operating time*. The supplied rapid charger BC-213* charges the BP-280 in 3.5 hours.
* Tx: Rx: Standby=5:5:90. Power save function ON. BC-213 may be not supplied depending on version.

Easy to Hear in a Noisy Environment
The large 36mm speaker of the transceiver provides clear 800mW* audio. The built-in BTL amplifier increases the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.
* Typical with internal speaker.

Built-in 5-Tone (Analogue mode)
The IC-F1000D/F2000D has built-in 5-Tone, CTCSS and DTCS signalling capability for analogue mode group communication and selective calling. The IC-F1000D/F2000D can be used as an analogue transceiver ready for future digital migration.

Optional GPS Speaker-Microphone
With the optional HM-171GPW GPS speaker-microphone, GPS position data can be attached to a voice or data transmission such as responding a GPS request status call.

Other Features
• DTMF autodial memories
• MDC functions: PTT ID, emergency call, radio check (RX) and stun/revive (RX)
• BIIS PTT ID call
• Surveillance function
• Escalating alarm
• VOX capability for hands-free operation
• Channel announcement function
• Red emergency switch on the top panel